Arp 2600 M
The
This module version of the ARP 2600 offers many advantages: Much lighter and less bulky, you will be able to take it easily on stage. You will also be able to house it more easily in your Home Studio.
Same components and even sound
What has made the ARP 2600 so successful for decades is the sound that is so musical, powerful and thick that it delivers no matter what setting is applied. While the clone builders have broken their teeth on it, this ARP 2600M uses the same components and the same "tickle" as the ARP 2600 FS, it will bring you the legendary sound you've been dreaming of for years.
Many improvements
For this Module version, KORG has pushed the control further, allowing for example to connect a USB keyboard in Plug and Play or the SQ-64 sequencer. You will also be able to control in DC the Pitch Bend, the modulation, and the Portamento ON/OFF.
- Type of synthesis : Analog
- LFO : 3
- Filters : Low pass
- Entries : USB, Sustain pedal, Midi, Audio in, CV in, Gate in, Trig in, USB Midi
- Outputs: Midi, Headphone, Audio, USB/Midi, Analog, CV out, Gate out
- Software provided: Korg bundle
- Envelope: ADSR, Attack - Release
- Included accessories: Patch cables, Power supply, semi-rigid case
- Sound generator: VCO
- Dimensions (mm): 520 × 129 × 311 mm
- Weight (kg): 5.90 kg
- Sequencer: No
- Number of effects: 1
- Polyphony max: 2
- Additional specs : Temperature range : 0 - +40 °C (without condensation)
- Maximum polyphony: 2 notes in duophonic, normally monophonic.
- VCO-1 (Voltage Controlled Oscilator 1)
- Wave forms: saw tooth, square
- Frequency range:
- Approx. 0.03 Hz - 30 Hz (low frequency mode)
- Approx. 10 Hz - 10 kHz (audio mode)
- Control voltage: 1 V/oct.
- VCO-2 (Voltage Controlled Oscilator 2)
- Waveforms: sawtooth, pulse (dynamic), triangle, sinusoidal
- Frequency range:
- Approx. 0.03 Hz - 30 Hz (low frequency mode)
- Approx. 10 Hz - 10 kHz (audio mode)
- Pulse width: 10% - 90%.
- Control voltage: 1 V/oct.
- VCO-3 (Voltage Controlled Oscilator 3)
- Waveforms: sawtooth, pulse (dynamic)
- Frequency range:
- Approx. 0.03 Hz - 30 Hz (low frequency mode)
- Approx. 10 Hz - 10 kHz (audio mode)
- Pulse width: 10% - 90%.
- Control voltage: 1 V/oct.
- VCF (Voltage Controlled Filter)
- Type: low pass (TYPE I: first 24 dB/oct..,
- TYPE II: second 24 dB/oct.)
- Frequency range: Approx. 10 Hz - 10 kHz
- Resonance: 1/2 - auto oscillation
- VCA (Voltage Controlled Amplifier)
- Control voltage:
- AR type (internally connected)
- ADSR type (internally connected)
- Noise generator : Spectral noise (White and Pink)
- RING MODULATOR
- Type: analog multiplier
- Input signal (internally connected): VCO-1 sawtooth, VCO-2 sinusoidal
- SAMPLE & HOLD
- Sampled signal: Noise (internally connected)
- Tools :
- AUDIO OUTPUTS JACKS
- Front panel (left - right exit jacks)
- Connectors: ?3.5 mm monaural jack
- Maximum output level: +9 dBu @ 10 kΩ load
- Output impedance: 1.2 kΩ
- Right side
- Connector: XLR
- Maximum output level: +4 dBu @ 600Ω load
- Output impedance: 1.2 kΩ
- HEADPHONE OUTPUT
- Connector: ?6.3 mm stereo jack
- Maximum output level: 50 mW + 50 mW @ 33Ω load
- Output impedance: 20Ω
- External Audio Input (Preamplifier Input) JACK
- Connector: ?3.5 mm Jack mono
- Maximum input level: ?10 dBu
- Input impedance: 100 kΩ
- MIDI connector: IN, OUT, THRU
- USB Port: Type B
- CV output voltage :
- Upper voice ?3 V - +10 V, 1 V/oct.
- Lower voice ?3 V - +7 V, 1 V/oct.
- LFO output voltage:
- Triangle ±5 V, 10 Vp-p
- Square +10 V, 10 Vp-p
- Sinusoidal ±3 V, 6 Vp-p
- External vibrato: input voltage: Max. ±10 V
- VIBRATO DEPTH slider: Max. 1 octave
- Cursor VIBRATO DELAY: 0 - 2.5 sec.
- LFO SPEED slider: Approx. 0.25 - 25 Hz
- PITCH BEND Control: ±1 octave
- Switch transposition: ±2 octave
- PORTAMENTO speed cursor: Maximum speed: about 0.25 msec/oct.
- Minimum speed: about 0.5 sec/oct.
- Recommended foot switch pedal for the PORTAMENTO: KORG PS-1/PS-3
- Recommended foot switch for INTERVAL KORG PS-1/PS-3
- Output voltage of the
- (on the ARP 2600 FS panel): 0 V key pressed up, +10 V key pressed down
- Output voltage TRIGGER
- (on the panel of the ARP 2600 M): +10 V, 0.5 ms pulse wave button pressed
- General
- Power supply: AC power
- Consumption: 30 W
- Euroguitar Referenz : 96916
