Disaster area DMC-6 Gen3
The Gen3 controllers have more features, more functions, and more connectivity than any of our previous controllers. The DISASTER AREA DMC-6 Gen3 is a compact MIDI controller designed to interface with a wide variety of musical equipment.
Up to six MIDI devices may be controlled by the Scrolling and Preset modes, for program selection and recall. The Preset mode may also control a seventh MIDI device with the capability for MIDI learning, such as the Disaster Area DPC-8EZ or SMARTSwitch.
If your MIDI device is equipped with a phrase looper / loop recorder mode, the DMC Gen3 may be able to control it. Looper modes for the Strymon Timeline, Line 6 M9 / M13, and Eventide H9 are supported at this time. Boss DD-500 and Pigtronix Infinity looper support is planned for a future update.
The DMC Gen3 controllers can also serve as a pedalboard clock source. The Tap and Clock modes serve to select preset beats-perminute (BPM) tempo and the DMC will send these clock signals out using a combination of MIDI and tap tempo output to a variety of compatible devices.
The DMC Gen3 also features MultiJack connector, which can perform several different functions to simplify your setup :
- connect one or two 1/4? MIDI devices from companies such as Alexander Pedals, Chase Bliss Audio, Empress, and Meris
- connect an expression pedal to send MIDI messages to one or more of your devices.
- connect an external footswitch for tap tempo control.
- send tap tempo to an external device such as a DD-7, Panther Cub, Flint, and more.
Need more control ? Use the USB port to interface with your computer or tablet device and turn the DMC-4 into a USB MIDI controller. Maybe you have a Zoom MultiStomp (MS-50G / MS-60B / MS-70CDR?) or a newer Red Panda pedal Connect it to the USB port using our gHOST Adapter to control it with MIDI!
Note : using the looper disables one of the available MIDI devices in scrolling and preset modes.
- SKU Disaster Area DMC6GEN3
- Programmable MIDI controller
- Controls up to 7x MIDI devices
- Send program changes, continuous controller messages, MIDI notes, and more
- Programmable MIDI clock and tap source to synchronize tempo on multiple pedals
- 99x presets
- 3x MultiJacks outputs (Expression Pedal input, Tap Tempo Output, Function Switch Output, Footswitch Input, MIDI Output)
- Internal DIP switches to customize MultiJack functions
- 1x Expression connnector can function as Expression Pedal input, Function Switch input, or MIDI output.
- Runs on standard 9V power, 80 mA
- 250 x 66 x 51 mm
- Manual : https://static1.squarespace.com/static/5ffa32e2e3802f025d87246d/t/5ffb660dab8b306cc83c2eed/1610311183043/DMC-6+Gen3+Manual+v1.05e.pdf
- Euroguitar Referenz : 98151