Dpa 4055 Kick Drum Microphone
The DPA 4055 Kick Drum microphone is a drum microphone.
Designed to give bass a kick, the 4055 takes the traditional kick drum mic concept and puts it into practice
Capture the true sound of the instrument
Flat frequency response so you can shape the sound the way you want it.
Built to withstand heavy use on stage.
Asymmetrical design for easy placement indoors or out
The 4055 offers DPA's renowned sound, clarity and linear frequency response, both on- and off-axis. This mic is designed to be placed inside or outside the kick drum, giving you virtually unlimited possibilities for capturing the subtle nuances of the drum sound.
Principle of operation Pressure gradient
Cartridge type Pre-polarized condenser
Frequency response20 Hz - 20 kHz
Effective frequency range ±2 dB, at 20 cm (7.9 in)40 Hz - 18 kHz with a 6 dB soft boost at 10 kHz
Sensitivity, nominal, ±2 dB at 1 kHz2 mV/Pa; -54 dB re. 1 V/Pa
Equivalent noise level, A-weightedTyp. 27 dB(A) re. 20 µPa (max. 29 dB(A))
Equivalent noise level, ITU-R BS.468-4Typ. 39 dB (max. 41 dB)
Distortion, THD < 1%156dB SPL RMS, 159 dB SPL peak
Dynamic rangeTyp. 132 dB
Max. SPL, THD 10%164 dB SPL peak
Rated output impedance380 Ω
Minimum load impedance2 kΩ
Cable drive capability100 m (328 ft)
Output balance principle Impedance balancing with Active Drive
Common mode rejection ratio (CMRR)> 55 dB
Power supply (for full performance)P48 (Phantom Power)
Current consumption2.0 mA
ConnectorXLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
ColorMatte black
Weight241 g (8.5 oz)
Microphone diameter57 mm (2.24 in)
Capsule diameter17 mm (0.67 in)
Microphone length132 mm (5.19 in)
Maximum output voltage, RMS9.75 V
Polarity+V at pin 2 for positive sound pressure
Temperature range-40°C to 45°C (-40°F to 113°F)
Relative humidity (RH)Up to 90%
Euroguitar Referenz : 103078