Dpa 4188-DC-F-F00-LH
Über das Produkt
The Micro DPA 4188 is a micro headband that attaches to both ears.
It adapts to all ear sizes.
It offers a precise and natural sound, with effective protection against plosives.
It comes with two different sized windscreens, a protective cap for the capsule, a cable clip.
EIGENSCHAFTEN
- Directional pattern: Cardioid
- Principle of operation: Pressure gradient
- Cartridge type :Pre-polarized condenser
- Frequency range 20 Hz - 20 kHz
- Frequency range, ±2 dB, Near field 2-3 cm (0.8 - 1.2 in) 100 Hz - 20 kHz with 3 dB soft boost at 8 - 20 kHz
- Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa
- Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
- Equivalent noise level, ITU-R BS.468-4 Typ. 38 dB (max. 40 dB)
- S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 68 dB(A)
- Total harmonic distortion (THD) - Legacy < 1% up to 123 dB SPL peak, < 1% up to 120 dB SPL RMS sine
- Total harmonic distortion (THD) - CORE < 1% THD up to 137 dB SPL peak
- Dynamic range - Legacy Typ. 95 dB
- Dynamic range - CORE Typ. 111 dB
- Max. SPL, peak before clipping 144 dB
- Output impedance From MicroDot: 30 - 40 Ω. From DAD6001-BC: 100 Ω
- Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
- Output balance principle Signal balanced with DAD6001-BC XLR Adapter
- Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
- Power supply (for full performance) Min. 5 V to max. 50 V through DPA adapter for wireless systems
- Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
- Connector MicroDot
- Color Black or beige
- Weight Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cabel: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz)
- Microphone diameter 5.4 mm (0.21 in)
- Cable length 1.3 m (4.3 ft)
- Cable color Black or beige
- Cable diameter 1.6 mm (0.06 in)
- Polarity +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
Electromagnetic compatibility (EMC) Fully compatible
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%
- Euroguitar Referenz : 84734
- Principle of operation: Pressure gradient
- Cartridge type :Pre-polarized condenser
- Frequency range 20 Hz - 20 kHz
- Frequency range, ±2 dB, Near field 2-3 cm (0.8 - 1.2 in) 100 Hz - 20 kHz with 3 dB soft boost at 8 - 20 kHz
- Sensitivity, nominal, ±3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa
- Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
- Equivalent noise level, ITU-R BS.468-4 Typ. 38 dB (max. 40 dB)
- S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL) Typ. 68 dB(A)
- Total harmonic distortion (THD) - Legacy < 1% up to 123 dB SPL peak, < 1% up to 120 dB SPL RMS sine
- Total harmonic distortion (THD) - CORE < 1% THD up to 137 dB SPL peak
- Dynamic range - Legacy Typ. 95 dB
- Dynamic range - CORE Typ. 111 dB
- Max. SPL, peak before clipping 144 dB
- Output impedance From MicroDot: 30 - 40 Ω. From DAD6001-BC: 100 Ω
- Cable drive capability Up to 300 m (984 ft) with DAD6001-BC XLR Adapter
- Output balance principle Signal balanced with DAD6001-BC XLR Adapter
- Common mode rejection ratio (CMRR) > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter
- Power supply (for full performance) Min. 5 V to max. 50 V through DPA adapter for wireless systems
- Current consumption Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter
- Connector MicroDot
- Color Black or beige
- Weight Microphone boom: 0.8 g (0.03 oz). Earhook: 1.1 g (0.04 oz). Cabel: 6.6 g (0.23 oz). Total: 8.5 g (0.30 oz)
- Microphone diameter 5.4 mm (0.21 in)
- Cable length 1.3 m (4.3 ft)
- Cable color Black or beige
- Cable diameter 1.6 mm (0.06 in)
- Polarity +V at MicroDot pin for positive sound pressure (and pin 2 on DAD6001-BC XLR adapter)
Electromagnetic compatibility (EMC) Fully compatible
Temperature range -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH) Up to 90%
- Euroguitar Referenz : 84734
