Qsc KW122
The QSC KW122 is a 1000W class D active speaker.
- 12” Woofer; 1.75” diaphragm compression driver
- 75° conical DMT coverage
- Maximum SPL 131 dB peak
- Also functions as monitor floor wedge
- 1000-watt Class D power modules in all models (2 × 500 W continuous)
- Rugged, texture-painted birch enclosures
- Four-position Mic/Line gain (full-range models)
- Tour-grade 16 gauge steel grilles
- Comfortable ergonomic handles
- 35 mm pole sockets with Tilt-Direct™
- M10 rigging points for suspended installation
- Low 12" cone transducer
- High 1.75" diaphragm compression driver
- Frequency Response (-6 dB): 53 Hz to 18 kHz
- Frequency Range (-10 dB): 50 Hz to 20 kHz
- Nominal Coverage (-6 dB): 75° axisymmetric
- Maximum SPL: 131 dB peak
Amplifier
- Power Output: 1000 W Class D (500 W LF + 500 W HF) continuous
- 2000 W peak
- Input impedance: Channel B XLR / ¼": 38 kΩ balanced / 19 kΩ unbalanced
- Channel B RCA: 10 kΩ
- Controls: Power, Gain A, Gain B, Channel A Input Gain (0 dB / 12 dB / 24 dB / 36 dB), LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
- Connectors: Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
- Dimensions: (HWD) inches: 26 x 15 x 15.4
- Dimensions (HWD) mm: 660 × 381 × 391
- Net Weight: 49 lb / 22.2 kg
- Euroguitar Referenz : 77350