Thorens TD 201 A BLANC
The Thorens TD 201 A White is a Manual Turntable - White finish.
The Thorens TD 201 turntable is easy to use for everyday use. It has a belt drive system with a DC motor that allows the platter to rotate at 33 1/3 and 45 rpm, with a variation of +/- 2%. You can select the speed via a switch on the front of the turntable, on the left side. The platter has a diameter of 30 cm and is made of die-cast aluminium.
The superior audio quality of a built-in line phono preamp
Has a built-in phono preamp in its chassis, which allows it to be connected to the line input of a stereo amp, hi-fi system, or even a pair of wireless speakers that do not have a phono input. The phono preamp can be disconnected, allowing you to connect it to the phono input of a stereo amp or use an external phono preamp if you wish.
Pure, noise-free sound with the TP 71 tone arm
The TD 201 is equipped with a new Thorens TP 71 tone arm, made of a lightweight, vibration-damping aluminium tube. The statically balanced tone arm ensures excellent tracking and noise-free sound reproduction. It also features a graduated anti-skating adjustment at the base of the pivot and a cell holder compatible with all standard 1/2" mount phono cells and weighing between 3.5 and 6 grams.
Start listening to your vinyl with the AT 3600
Comes with an Audio-Technica AT 3600 phono cartridge factory mounted and adjusted. This moving magnet (MM) cell features an elliptical diamond, allowing you to start listening to your vinyl records quickly once the turntable is integrated into your system. Of course, the Audio-Technica AT 3600 can be replaced with another phono cell that is compatible with the 1/2" mounting system.
Features
- High quality construction
- Equipped with a switchable phono/line pre-amp
- Audio Technica cell already mounted and set up from factory
- Compatible with 33 and 45 rpm playback speeds
- Manual turntable
- Belt drive
- Built-in RIAA phono pre-amp (switchable)
- DC motor
- Rotational speed: 33-1/3 rpm, 45 rpm
- Speed variation: +/-2%.
- Fade and flicker: 0.2
- Signal-to-noise ratio: 67 dB or higher (A-weighted, 20 kHz LPF) / 60 dB or higher (unweighted, 20 kHz LPF)
- Finish: White
Platter
- Die-cast aluminium
- Equipped with a damping ring
- Platter diameter: 12" (300 mm)
- Rubber mat included
- TP 71 tone arm
- Design: aluminium tube
- Type: straight, static balance
- Effective length: 8.8" (223.6 mm)
- Grip force: 0 to 4 g
- Recommended cell weight: 3.5 to 6.0 g
- Overhang: 18.6 mm
- Adjustable anti-skating
- Cell holder weight: 10 g (including nuts, bolts and cables)
Cell
- Audio-Technica AT3600 model
- Type: moving magnet (MM)
- Tip: bonded diamond
- Frequency response: 20 Hz to 20 kHz
- Channel separation: >18 dB
- Channel balance: 2.5 dB
- Vertical tracking angle: 20 degrees
- Supported load impedance: 47 ohms
- Output voltage: 2.5 mV (1 kHz, 3.54 cm/sec.)
- Recommended holding force: 3.5 g (+/- 0.5 g)
- Cell weight: 5 g (+/- 0.5 g)
Connections
- Analogue stereo audio output: gold-plated RCA connectors
Power supply
- Mains voltage: AC 100 - 240V, 50/60Hz
- Power consumption: 1.5W (less than 0.5W in standby)
Logistic data
- Dimensions (W x H x D): 420 x 355 x 121 mm
- Weight: 3.9 kg
Euroguitar Referenz : 107049
