Victory amplification V4 The Sheriff Guitar Amp

La VICTORY V4 The Sheriff Guitar Amp is a guitar amplifier head in a pedal format. Combining a V4 all-valve preamp with a power section (180w @ 4 ohms, 90w @ 8 ohms, 45w @ 16 ohms), and on-board Two notes DynIR technology, it offers all the Jack tone in a small box.

With two channels the V4 Sheriff amp can go from 60’s blues through to hot-rodded hair metal tones. Gain 1 has less gain and can be used for edge of breakup sounds through to classic rock. Gain 2 is full-on modded plexi high gain sounds.
The V4 Sheriff Guitar Amp was designed to be able to handle any situation. It’s portable, powerful and practical.

It features two channels, channel one being clean to mild breakup and channel two being your overdrive channel.
A three-band EQ with powerful bass, middle and treble controls will shape your tone. These also have an effect on the gain character and drive levels – just like in any valve guitar amp.
A lush sounding digital reverb gives you ambience aplenty. Run it low for a subtle feeling of space, or max it out for washy, splashy hugeness. The reverb is foot-switchable using a TRS cable (sold separately).

Two notes Audio engineering Torpedo-embedded DynIR Virtual Cabinet technology is onboard the Jack. The Cab Sim XLR makes is super easy to take you Victory virtual cabinets anywhere. The presets have been created by Jack Gardiner for the Jack.
Straight out of the box you have access to six presets created by Victory artist Jack Gardiner. These have been specifically created by Jack for the V4 Jack guitar amp. There are ten Victory virtual cabinets included with the amp and a collection of microphones and positions to choose and build your own presets. All this can be accessed by plugging the V4 Jack guitar amp into your computer, via Torpedo Remote (download for free from the Two notes website) – this is also where you access the power amp modes, rooms, studio-grade EQ and audio enhancer. Register your device with Two notes to gain access to a further two Two notes DynIR cabs.

VRC Valve Response Circuit : the idea behind this little piece of the circuit is to mimic what a “resonance” or “thump” (other adjectives are available!) control does in the power amp of a valve amp.
So with the V.R.C (™) circuit you get closer to how a valve power section should feel but in a tiny amp you can throw in your backpack and still get up to 180 watts of power.

Series effects loop sits between the preamp and power amp. Run your time-based effects here for maximum clarity.

Balanced line out and headphone out allows to send a direct feed to a separate speaker simulator, front of house or wherever you like.
Can be used with or without a speaker connected. The inbuilt headphone output makes silent practice quick and easy.

If you want to power some extra pedals and stick this on your board, a 9V DC power output is included. That will put out a maximum of 500mA. This is more than enough for the vast majority of drives, fuzzes and analogue delays and so on.