Dsm humboldt Simplifier Bass Station
DSM & HUMBOLDT Simplifier Bass Station is everything you ever needed to go direct to the FOH or recording amazing bass tones without sacrificing anything. It includes a Bass Preamp with gain, level, and a 3 band EQ with semi-parametric mid control. A parallel signal routing with a selectable LPF, dual FX loop (for preamp and parallel signal), and an amazing analog cabinet simulation, based on the acclaimed Omnicabsim ® by DSM Noisemaker.
The preamp stage is based on the Ampeg SVT ®. This amp stands out for it’s personality, versatility and articulation. Including its flexible EQ with +- 15dB per band, and the switchable midrange from 400-900-1500Hz. Across most of the gain settings, the amp is tight and clear. But with higher gains, it will grunt and growl like a real Ampeg SVT does.
Simplifier Bass Station separates the signal at the input for a parallel line, bypassing the preamp, and including a switchable low pass filter (100Hz, Off, 500Hz). The effect of blending this clean signal with the preamp tone let’s you overdrive the preamp while retaining a huge low end response and natural dynamics.
The Cabinet simulation was carefully designed to get the most distinctive cabinet tones. A Closed Back 8x10, with its tight and punchy lows. A vented 1x15 for warm creamy mids and thick lows, and a vented 4x10 for more open, wider range response. The Speaker color switch, Warm, Bright and Modern, simulates the different materials and geometry of bass speakers, which affects the dynamics and midrange response. And with the Resonance and Mic position controls, you can adjust the exact amount of high end brightness and the cabinet low end resonance you want.
It also includes two effect loops, so you can use different effects on the main (preamp) and on the parallel signal chain. The sky is the limit here. Try a compressor for the parallel signal, and a chorus on the preamp; or a delay that only repeats the bottom end, or even a volume pedal to control the parallel blend in real time. Use your imagination to get bass tones never heard before !
- SKU DSM & Humboldt DSM-SIMC
- Bass preamp & cabinet simulator
- Made in Chile
- 2022
- Can be connected directly to an FOH or recording mixer
- Analog pre-amp based on the Ampeg SVT with gain, level and 3-band EQ with semi-parametric center control
- Analog cabinet simulation with 3x voicings (8x10, 1x15, 4x10) with microphone position and resonance controls
- Parallel signal routing with selectable LPF
- Dual FX loop (for preamp and parallel signal)
- Controls : see pictures
- I/O : see pictures
- Powered with optional bloc
- Current draw 80 mA
- Battery operation not supported
- 115 x 65 x 55 mm
- 430 g
- Euroguitar Referenz : 102391