Lewitt LCT 640 TS

1079.00 €
835.00 €

Nicht verfügbar - kontaktieren Sie uns
Euroguitar Lille : Nicht verfügbar

Ihr Geschäft

36 rue Littré, Lille
von Montag bis Samstag
10h-12h30 & 14h-19h


Telefon : 03 20 88 85 85

Schließen

Verfügbarkeit Warnung

Pour recevoir un mail dès que ce produit sera disponible,
veuillez saisir votre adresse mail ci-dessous.

IM MOMENT NICHT VERFÜGBAR - kontaktieren Sie uns

3 Jahre Garantie (AGB)

30 Tage anders zu überlegen (AGB)

Best Preis Garantie

Über das Produkt

Designed and engineered in Austria, the LCT 640 TS will revolutionize the way we think about the recording process. Since the signal of the front and back diaphragm is provided by independent circuitries, any kind of polar pattern can be realized dynamically - even after the recording.

The LCT 640 TS provides the signal of the front and the back diaphragm of the capsule separately. In addition to your standard XLR cable plug in the included adapter cable and experience all the possibilities of this true next-gen microphone. Use both outputs to capture the whole session instead of committing to a single source

EIGENSCHAFTEN
- Type :Condenser, externally polarized
- Acoustical operating principle :Pressure gradient transducer
- Diaphragm :3 micron gold sputtered Mylar
- Transducer Ø :25.4 mm, 1 in
- Polar pattern (Dual Output Mode) :Create any polar pattern in post-production
- Polar pattern (Multi-Pattern Mode) :omni, wide cardioid, cardioid, supercardioid, figure-8
-Sensitivity
31.4 mV/Pa, -30.1 dBV/Pa (cardioid)
30.3 mV/Pa, -30.3 dBV/Pa (omni)
34.1 mV/Pa, -29.4 dBV/Pa (figure-8)
-Equivalent noise level
10 dB (A), cardioid
-Max. SPL for 0.5 % THD
134 dBSPL, 0 dB pre-attenuation
- Signal / noise ratio
84 dB (A)
-Dynamic range
124 dB (A)
Pre-attenuation pad
0 dB
-6 dB
-12 dB
-18 dB
- Low-cut filter
linear
40 Hz (12 dB/oct)
80 Hz (12 dB/oct)
160 Hz (6 dB/oct)
- Internal impedance
110 Ω
- Rated load impedance
1,000 Ω
- Supply voltage
48 V ± 4 V
- Current consumption
5.1 mA
- Mic enclosure
Zinc die cast
- Connector
Gold plated 3-pin XLR + Mini 3-pin XLR
- Microphone dimensions
158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 in
- Microphone net weight
425 g, 14.9 oz
- Euroguitar Referenz : 86276
Durch den Besuch dieser Website erklären Sie sich mit der Verwendung von Cookies einverstanden. über Cookies.
OK, ich habe verstanden.