Rme Fireface 802 FS AE

1999.00 €
1849.00 €
Ihr Geschäft

36 rue Littré, Lille
von Montag bis Samstag
10h-12h30 & 14h-19h


Telefon : 03 20 88 85 85

Schließen

Verfügbarkeit Warnung

Pour recevoir un mail dès que ce produit sera disponible,
veuillez saisir votre adresse mail ci-dessous.

LIEFERBAR - 8-10 Tage Versand

3 Jahre Garantie (AGB)

30 Tage anders zu überlegen (AGB)

Best Preis Garantie

Über das Produkt

The Fireface 802 FS Anniversary Edition (AE) is a special edition celebrating 20 years of RME excellence.

It retains the Fireface 802’s powerful features, including 60 input/output channels, ultra-low latency and incredibly transparent sound quality.

It also includes RME’s renowned TotalMix FX mixing software, enabling advanced routing and effects management.

This AE model is distinguished by its exclusive design, limited to a small number of units worldwide…, with a very elegant black finish, offering a premium aesthetic for enthusiasts and professionals.

EIGENSCHAFTEN
Connectivity
12 analog inputs
4 mic/instrument preamps
2 headphone outputs
1 MIDI I/O
1 AES/EBU I/O
2 ADAT I/O (or 2 SPDIF I/O) or 1 ADAT I/O plus 1 SPDIF I/O optical
1 Word Clock I/O
Analog
AD Inputs, Line 1-8 (rear)
Input: 6.3 mm TRS, electronically balanced
Signal-to-Noise Ratio (SNR) @ LoGain: 116 dB (AES17), 118 dBA
SNR @ +4 dBu: 115 dB (AES17), 117 dBA
Frequency response @ 44.1 kHz, -0.1 dB: 8.9 Hz – 20.4 kHz
Frequency response @ 96 kHz, -0.5 dB: 4.3 Hz – 45.2 kHz
Frequency response @ 192 kHz, -1 dB: 3 Hz – 89 kHz
Filter: Short Delay Sharp, 5 / 5 / 6 samples delay
THD @ -1 dBFS: < -120 dB, < 0.0001%
THD+N @ -1 dBFS: < -110 dB, < 0.00032%
Channel separation: > 110 dB
Max input level: +19 dBu
Input impedance @ 1 kHz: 10 kOhm unbalanced, 10.6 kOhm balanced
Input sensitivity: switchable between Lo Gain and +4 dBu
Input level for 0 dBFS @ Lo Gain: +19 dBu
Input level for 0 dBFS @ +4 dBu: +13 dBu
Variable digital gain: 0 to +12 dB
Min level for 0 dBFS: +1 dBu, -1.2 dBV
Microphone Inputs 9-12 (front)
Input: XLR, electronically balanced
Input impedance: 3.4 kOhm
SNR: 113 dB RMS unweighted, 116 dBA
Gain range: 54 dB
Max input level, Gain +6 dB: +10 dBu
Max input level, Gain +60 dB: -44 dBu
CLIP LED: 0 dBFS
SIG LED: -42 dBFS
Instrument Inputs 9-12 (front)
Input: 6.3 mm TS jack, unbalanced
Input impedance: 1 MOhm
SNR: 113 dB RMS unweighted, 116 dBA
Max input level, Gain +6 dB: +21 dBu
Max input level, Gain +60 dB: -33 dBu
Frequency response @ 44.1 kHz, -0.5 dB: 2.5 Hz – 20.8 kHz
Frequency response @ 96 kHz, -0.5 dB: 2.5 Hz – 25 kHz
Frequency response @ 192 kHz, -1 dB: 1.7 Hz – 36 kHz
DA - Stereo Monitor Output (Headphones 9-12)
Output: 2 x 6.3 mm TRS stereo jack, unbalanced
Max output level at 0 dBFS: +17 dBu
Max power per channel @ 32 Ohm, 0.02% THD: 200 mW (2.5 Vrms, +10 dBu)
SNR: 116 dB (AES17), 118 dBA
Output impedance: 2 Ohm
DA, Line Outputs 1-8 (rear)
Output: 6.3 mm TRS jack, servo-balanced
SNR @ HiGain: 116.5 dB (AES17), 118.5 dBA
SNR @ +4 dBu: 116 dB (AES17), 118 dBA
SNR @ -10 dBV: 107 dB (AES17), 109 dBA
Frequency response @ 44.1 kHz, -0.1 dB: 0 Hz – 20.2 kHz
Frequency response @ 96 kHz, -0.5 dB: 0 Hz – 44.6 kHz
Frequency response @ 192 kHz, -1 dB: 0 Hz – 77.5 kHz
THD+N: < -110 dB, < 0.00032%
Channel separation: > 110 dB
Output level switchable: Hi Gain, +4 dBu, -10 dBV
Output level at 0 dBFS @ Hi Gain: +19 dBu
Output level at 0 dBFS @ +4 dBu: +13 dBu
Output level at 0 dBFS @ -10 dBV: +2 dBV (+4.2 dBu)
Output impedance: 75 Ohm
MIDI
1 x MIDI I/O via 5-pin DIN jacks
Galvanically isolated by optocoupled input
High-speed mode: Jitter and response time typically below 1 ms
Separate 128-byte FIFOs for input and output
Digital
Clocks
Internal, ADAT In, AES In, SPDIF In, Word Clock In
Jitter suppression of external clocks: > 50 dB (> 1 Hz)
Effective clock jitter influence on AD and DA conversion: near zero
PLL ensures zero dropout, even with jitter above 100 ns
Digital Bitclock PLL for trouble-free varispeed ADAT operation
Supported sample rates: 28 kHz to 200 kHz
Digital Inputs
AES/EBU:

1 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992
High-sensitivity input stage (< 0.3 Vpp)
SPDIF compatible (IEC 60958)
Accepts Consumer and Professional formats
Lock range: 27 kHz – 200 kHz
Jitter suppression: > 50 dB (> 1 Hz)
ADAT Optical:

2 x TOSLINK, format according to Alesis specification
Standard: 2 x 8 channels, 24-bit, up to 48 kHz
Double Speed (S/MUX): 2 x 4 channels, 24-bit, 96 kHz
Quad Speed (S/MUX4): 2 x 2 channels, 24-bit, 192 kHz
Bitclock PLL ensures perfect synchronization even in varispeed operation
Lock range: 31.5 kHz – 50 kHz
Jitter suppression: > 50 dB (> 1 Hz)
SPDIF Optical (ADAT 1/2 + ADAT 9/10):

2 x optical, according to IEC 60958
Accepts Consumer and Professional formats
Lock range: 27 kHz – 200 kHz
Jitter suppression: > 50 dB (> 1 Hz)
Word Clock
BNC, not terminated (10 kOhm)
Switch for internal 75 Ohm termination
Automatic Double/Quad Speed detection and internal conversion to Single Speed
SteadyClock guarantees ultra-low jitter synchronization even in varispeed operation
Not affected by DC offsets in the network
Signal Adaptation Circuit: signal refresh through auto-centering and hysteresis
Overvoltage protection
Level range: 1.0 Vpp – 5.6 Vpp
Lock range: 27 kHz – 200 kHz
Digital Outputs
AES/EBU:

1x XLR, transformer-balanced, galvanically isolated, according to AES3-1992
Output level Professional 4.2 Vpp, Consumer 2.4 Vpp
Format Professional according to AES3-1992 Amendment 4
Format Consumer (SPDIF) according to IEC 60958
Single Wire mode, sample rate 28 kHz up to 200 kHz
ADAT:

2 x TOSLINK, format according to Alesis specification
Standard: 2 x 8 channels 24-bit, up to 48 kHz
Double Speed (S/MUX): 2 x 4 channels, 24-bit, 96 kHz
Quad Speed (S/MUX4): 2 x 2 channels, 24-bit, 192 kHz
SPDIF Optical (ADAT 1/2 + ADAT 9/10):

Format Consumer (SPDIF) according to IEC 60958
Sample rate: 28 kHz up to 200 kHz
Word Clock:

BNC
Output voltage: 5 Vpp@75 Ohm
Euroguitar Referenz : 113643
Durch den Besuch dieser Website erklären Sie sich mit der Verwendung von Cookies einverstanden. über Cookies.
OK, ich habe verstanden.