Sennheiser E 600 Series Drum Kit
Über das Produkt
The kit E600 is a set of microphones ideal for miking drums. It includes a E602 -II , 4 E604 , 2 E614 , all in a beautiful aluminum case. Use the e602 for a kick, the e604 for your drums ( toms , snare ) and finally 2 e614 for taking " overhead " effective. You can carry them easily and without risk of breakage thanks to the robust aluminum case .
EIGENSCHAFTEN
- 1x Sennheiser E 602-II-
- rugged, light aluminium housing for stable positioning on long microphone boom arms
- light, high-grade voice coil construction
- fast transient response
- low frequency extension
- ideal for direct use on the most difficult bass signals
- frequency-independent directivity ensures isolation of other on-stage signals
- humbucking coil
- integral stand mount
- including protective bag
- dynamic transducer
- cardioid pickup pattern
- frequency range of 20 to 16,000 Hz
- sensitivity in free field, no load (1 kHz): 0.25 mV/Pa; (50 Hz): 0.9 mV / Pa
- nominal impedance of 350 Ohm
- minimal terminating impedance of 1,000 Ohm
- XLR-3 connector
- dimensions: 60 x 153 mm (Ø x L)
- weight: 318 gr
- 4x Sennheiser E 604 -
- dynamic instrument microphone
- solid glass fibre housing
-insensitive to impact of handling noise
- very high sound pressure processing possibilities
- low distortion
- hum-compensating coil
- can easily be positioned thanks to a compact design
- integral stand mount
- including drum clip and pouch
- dynamic transducer
- cardioid pickup pattern
- frequency response of 40 to 18,000 Hz
- sensitivity in free field, no load (1 kHz): 1.8 mV/Pa
- nominal impedance of 350 Ohm
- minimal terminating impedance of 1,000 Ohm
- dimensions: 33 x 59 mm (Ø x L)
- weight: 60 grams
- 2x Sennheiser E 614 -
- condenser instrument microphone
- solid design
- effective rejection of incidental background noise
- excellent diffusion over the entire frequency range
- full and natural sound
- high maximum sound pressure level
- wide frequency response of 40 Hz to 20 kHz
- pre-polarised condenser transducer
- super-cardioid pickup pattern
- sensitivity in free field, no load (1 kHz): 3 - mV/Pa = -50 dB (0 dB = 1 V/Pa)
- nominal impedance: 50 Ohm
- minimum terminating impedance of 1,000 Ohm
- maximum sound pressure level of 139 dB (SPL)
- equivalent noise level of 24 dB (A) (35 dB when weighted per CCIR 468-3)
- 12 - 52 V / 3 mA phantom power supply
- XLR-3 connector
- dimensions: 20 x 100 mm (Ø x L)
- weight excluding cable: 93 gr
- Euroguitar Referenz : 8842
- rugged, light aluminium housing for stable positioning on long microphone boom arms
- light, high-grade voice coil construction
- fast transient response
- low frequency extension
- ideal for direct use on the most difficult bass signals
- frequency-independent directivity ensures isolation of other on-stage signals
- humbucking coil
- integral stand mount
- including protective bag
- dynamic transducer
- cardioid pickup pattern
- frequency range of 20 to 16,000 Hz
- sensitivity in free field, no load (1 kHz): 0.25 mV/Pa; (50 Hz): 0.9 mV / Pa
- nominal impedance of 350 Ohm
- minimal terminating impedance of 1,000 Ohm
- XLR-3 connector
- dimensions: 60 x 153 mm (Ø x L)
- weight: 318 gr
- 4x Sennheiser E 604 -
- dynamic instrument microphone
- solid glass fibre housing
-insensitive to impact of handling noise
- very high sound pressure processing possibilities
- low distortion
- hum-compensating coil
- can easily be positioned thanks to a compact design
- integral stand mount
- including drum clip and pouch
- dynamic transducer
- cardioid pickup pattern
- frequency response of 40 to 18,000 Hz
- sensitivity in free field, no load (1 kHz): 1.8 mV/Pa
- nominal impedance of 350 Ohm
- minimal terminating impedance of 1,000 Ohm
- dimensions: 33 x 59 mm (Ø x L)
- weight: 60 grams
- 2x Sennheiser E 614 -
- condenser instrument microphone
- solid design
- effective rejection of incidental background noise
- excellent diffusion over the entire frequency range
- full and natural sound
- high maximum sound pressure level
- wide frequency response of 40 Hz to 20 kHz
- pre-polarised condenser transducer
- super-cardioid pickup pattern
- sensitivity in free field, no load (1 kHz): 3 - mV/Pa = -50 dB (0 dB = 1 V/Pa)
- nominal impedance: 50 Ohm
- minimum terminating impedance of 1,000 Ohm
- maximum sound pressure level of 139 dB (SPL)
- equivalent noise level of 24 dB (A) (35 dB when weighted per CCIR 468-3)
- 12 - 52 V / 3 mA phantom power supply
- XLR-3 connector
- dimensions: 20 x 100 mm (Ø x L)
- weight excluding cable: 93 gr
- Euroguitar Referenz : 8842
SIE KÖNNEN AUCH DIESES PRODUKT MÖGEN:
