Strymon LEX Rotary Speaker System V2
Lex provides you with a complete, accurately reproduced rotary speaker system : the low-frequency bass rotor, the rotating treble horn, the tube-driven amplifier, finely tuned microphone placement, and all the complex sonic interactions between these elements. Powerful, intuitive controls mean you can quickly dial in just the customized sound you desire.
Second generation Lex gives you the same rich rotary sounds of original and adds significant features, incorporating technological advancements, hardware improvements and design enhancements to give you additional flexibility, power, and ease of use on stage and in the studio.
So what's new on the STRYMON LEX Rotary Speaker System V2 compact effect pedal ? :
- Full MIDI implementation means you can control just about every switch, knob, and setting remotely by sending MIDI commands from your controller or DAW via Lex’s EXP/MIDI jack or USB-C connection.
Rotor speed can be synchronized via MIDI Clock Sync, and the sync setting can be saved for each preset.
300 MIDI preset locations are available for loading and saving your favorite settings.
- A premium analog JFET input circuit ensures superb responsiveness to your playing, and you can select mono or stereo input with the flick of a rear panel switch.
All this, plus a new ARM DSP chip provides more processing power for every sonic nuance, with less energy consumption on your pedalboard.
- A more powerful and intuitive user interface gives you instant control over mic position and distance, dry level, acceleration speed, volume boost/cut, and easy customization of rotor speed.
Everything you need for the full rotary speaker experience is at your fingertips.
- Dry mix control, which allows you to add more dry mix to your signal for a cleaner, clearer tone — or go full wet, and truly immerse your signal in rotating speaker goodness.
- SKU Strymon LEXV2
- Accurately reproduced rotary speaker system
- For electric guitar
- Made in USA
- 2022
- High impedance ultra-low noise discrete Class A JFET preamp input
- 520MHz ARM Superscalar processor
- Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters provide uncompromising audio quality
- 32-bit floating point processing
- 20Hz to 20kHz frequency response
- Full MIDI implementation, allowing to control just about every switch, knob, and setting remotely by sending MIDI commands from your controller or DAW via Lex’s EXP/MIDI jack or USB-C connection
- 300 presets for loading and saving favorite settings
- A single TRS input jack gives the option to use a stereo input signal. A dedicated rear panel Input switch allows to set Lex for operation with a stereo (TRS) or mono (standard TS) input source. Low impedance dual TS output jacks let you use Lex as a stereo effect
- Expression pedal input allows the connection of a TRS expression pedal, MiniSwitch, MultiSwitch Plus, or TRS MIDI connection
- USB jack for controlling via MIDI from a computer or for performing firmware updates
- Dedicated Slow/Fast rotary speed & On/Off footswitches
- Lex lets you choose electromechanical relay switched true bypass for a 100% untouched signal when the pedal is bypassed (this is the default setting), or premium quality buffered bypass to preserve signal integrity (preventing high end roll-off due to longer cable runs)
- Cab Filter Live Edit setting allows to tailoring the speaker cab filter response for use specifically with audio interface, mixer, full-range speakers or guitar amp
- Controls : see pictures
- Connections : see pictures
- 9V DC power supply included
- Requires maximum 9 volts DC center-negative, with a minimum of 300mA of current
- 11.4 x 10.2 x 4.4 cm
- Manual : https://www.strymon.net/support/lex-v2/
- Euroguitar Referenz : 103360
