Ferrofish Verto MX Madi Multimode Optical and Coax
Über das Produkt
Dante converter - MADI optical multimode and coax - FF-VERTO-MX
EIGENSCHAFTEN
The VERTO MX is equipped with a MIDI port and two BNC wordclock connectors. This way an external Wordclock can be fed to the Dante network, or the Dante wordclock can be used for external devices.
MADI I/O (redundant)
MADI SFP (optical Multimode) + MADI Coaxial. Singlemode SFO module optional. The LC connector connects to SC via an included adapter cable. A SFP module with coax I/O is optionally available.
MIDI I/O
The integrated MIDI I/O ports in DIN 5pin format can be used to update the units’ internal firmware using a simple USB-MIDI device.
Word Clock I/O
BNC with 75 Ohm termination. Set to on by default – can be changed with the remote software via the network connection.
Dante Network I/O (redundant)
Two RJ-45 ports connect to any Dante audio network. Simply connect a LAN Ethernet cable (CAT5/CAT6) to the primary port. The secondary port takes automatically over in case of a network error (Dante Port Redundancy).
Dante I/O
2x RJ-45 Ethernet port (PRIMARY/SECONDARY), 1 GBit Network
64 x 64 channel I/O (Dante Brooklyn II board built-in)
MADI I/O (AES10)
Coaxial I/O (2 x BNC)
Optical I/O (2 x LC port via SFP, Multimode – Singlemode SFP module optional)
Channel count:
64 x 64 channels at 44.1, 48kHz
32 x 32 channels @ 88.2, 96kHz
16 x 16 channels @ 176.4, 192 kHz
MIDI I/O
2 x DIN 5-pin connectors for updating the unit
Wordclock I/O
BNC: 1 x input, 1 x output
75 Ohm Termination set by default (switchable via Dante)
Power Supply
14.4VA (1.2A at 12V)
Polyfuse internal, self-resetting
1 x power supply included
Operation
Temperature range: 41°F up to 113°F (+5°C up to +45°C)
Humidity: <75%, non-condensing
Weight/Size
Weight: 0,9 kg
Dimensions: 22 x 9 x 4,5 mm (without rack ears)
Optional accessories
19“ Rack mountain kit, metal (for mounting 1 x Verto in a 19” rack-space)
Multi-range Power Supply 12V (EU)
MADI Singlemode Module
MADI SC / LC Adapter
Euroguitar Referenz : 111587
MADI I/O (redundant)
MADI SFP (optical Multimode) + MADI Coaxial. Singlemode SFO module optional. The LC connector connects to SC via an included adapter cable. A SFP module with coax I/O is optionally available.
MIDI I/O
The integrated MIDI I/O ports in DIN 5pin format can be used to update the units’ internal firmware using a simple USB-MIDI device.
Word Clock I/O
BNC with 75 Ohm termination. Set to on by default – can be changed with the remote software via the network connection.
Dante Network I/O (redundant)
Two RJ-45 ports connect to any Dante audio network. Simply connect a LAN Ethernet cable (CAT5/CAT6) to the primary port. The secondary port takes automatically over in case of a network error (Dante Port Redundancy).
Dante I/O
2x RJ-45 Ethernet port (PRIMARY/SECONDARY), 1 GBit Network
64 x 64 channel I/O (Dante Brooklyn II board built-in)
MADI I/O (AES10)
Coaxial I/O (2 x BNC)
Optical I/O (2 x LC port via SFP, Multimode – Singlemode SFP module optional)
Channel count:
64 x 64 channels at 44.1, 48kHz
32 x 32 channels @ 88.2, 96kHz
16 x 16 channels @ 176.4, 192 kHz
MIDI I/O
2 x DIN 5-pin connectors for updating the unit
Wordclock I/O
BNC: 1 x input, 1 x output
75 Ohm Termination set by default (switchable via Dante)
Power Supply
14.4VA (1.2A at 12V)
Polyfuse internal, self-resetting
1 x power supply included
Operation
Temperature range: 41°F up to 113°F (+5°C up to +45°C)
Humidity: <75%, non-condensing
Weight/Size
Weight: 0,9 kg
Dimensions: 22 x 9 x 4,5 mm (without rack ears)
Optional accessories
19“ Rack mountain kit, metal (for mounting 1 x Verto in a 19” rack-space)
Multi-range Power Supply 12V (EU)
MADI Singlemode Module
MADI SC / LC Adapter
Euroguitar Referenz : 111587
SIE KÖNNEN AUCH DIESES PRODUKT MÖGEN:
