Spl Elector Red
The SPL Elector is a pure analog preamplifier, based on SPL's VOLTAiR technology.
It is the perfect preamplifier for audio purists that do not use a streamer or computer for listening or use an external DA converter.
Elector provides six analog stereo inputs. Three of which are balanced with XLR connectors – this way, any kind of external players can be connected.
Furthermore, the Elector is equipped with the big remote controllable aluminum volume control with marker LED and two mechanical VU meters.
Another highlight is the Tape Monitor. External audio processors or tape machines can be inserted in the analog signal path.
In combination with the SPL Performer power amplifiers, it is possible to create an absolute high-end setup without any digital components. The ideal addition to the Elector is the phono preamp SPL Phonos – this way, the record player also benefits from the VOLTAiR technology. Thanks to a Direct Out, it is also possible to connect the popular SPL headphone amplifiers or power amplifiers to the Elector.
- 6 analog stereo inputs
- 3 x XLR, balanced (10 kOhm)
- 3 x RCA, unbalanced (47 kOhm)
- Max. input level: 32.5 dBu +32.5 dBu
Outputs
- 2 analog stereo outputs
- Neutrik XLR, symmetrical, pin 2 = (+)
- RCA, unbalanced (direct output)
- Impedance: 75 ohms (balanced)
- max. output level 32.5 dBu
The measures
- Frequency range: 10 Hz (-0.1 dB), 200 kHz (-1.2 dB)
- Diaphony at 1 kHz: -108 dB
- THD : 0.00992 % THD : 0.00992
- Noise (A-weighted): -102.5 dB
- Dynamic range: 135 dB
Internal tensions
- Analog: +/- 60 V
Power supply
- Mains voltage (switchable): 230 V AC / 50 Hz or 115 V AC / 60 Hz
- Fuses: 230 V : T 500 mA ; 115 V : T 1 A
- Power consumption: max. 40 VA
- Standby power consumption: 0.7 W
Dimensions (including feet)
- 278 mm W x 100 mm H x 337 mm D
- 10.95" W x 3.94" H x 13.27" D
Weight of the device
- 4.25 kg; 9.37 lb (unit only)
Euroguitar Referenz : 91808
